TENSYS® – Lorry/Truck/Trailer/Caravan – Telescopic 5m Height Measuring Stick – Metric Only

Take the guess work out of load height measurement or measuring access clearance. A simple flip of the 950mm long, over-centre measuring arm locks it in position and is secured by a further catch. A foam-covered tip to prevent damage to painted surfaces or vehicle bodywork.
An easy-to-read measurement scale with both metric & imperial measurements. Full operating instruction provided in a pocket on the outdoor on the storage/carrying holdall. Red storage/carry bag stores both the stick, bubble level, instructions, and a spare locking button.
Each section fully extends and then locks into position via the spring-loaded locking push buttons. Extends in 4 separate sections, first section locks in position at 220cm, second at 317cm, third at 414cm, fifth at 500cm. These are the heights displayed as each section locks into place. The height can also be as it should be displayed at any point before this by reading the scale at the top of the un-extended sections. Please see the instructions for full details
A circular bubble level attaches to the main body to verify the over centre arm is level and the stick is straight when measuring As Used By: Police & Fire services and products, Ferry Operators, Multi-vehicle transporters, Vehicle recovery Bizarre load carriers, Hay & straw bale hauliers, can be utilized in any application where the load or vehicle height must be checked
Standard minimum clearance of an unmarked bridge over the public highway is 16’6’’ (5.03m). Bridges with headroom less than this value must be signed to identify the maximum height of a vehicle which can safely pass on the carriageway under the bridge without impacting on it. Aluminium construction, when in use please be mindful of your surroundings, do not contact with any overhead wires or electrical equipment