Commercial vehicle reversing cameras are an important safety feature for UK HGV lorry drivers. By providing a clear view of the area behind the vehicle, they can help to avoid accidents when reversing articulated or rigid vehicles. In addition, reversing cameras can also be used to check for blind spots and ensure that the path is clear before proceeding. As a result, they can provide an essential extra layer of safety for both drivers and pedestrians. With so much at stake, it’s important to make sure that your commercial vehicle is equipped with a quality reversing camera system. In this article, we take a look at different types of camera systems that can be fitted to trucks allowing truck drivers to see clearly behind them as they maneuver their vehicles.
Some images and products shown in this article are affiliate links, we may earn a small commission if you use them, we hope you find the information provided about commercial vehicle reversing camera systems useful.
Types of commercial vehicle reversing cameras
Commercial vehicle reversing cameras are an essential safety feature for HGV truck drivers. There are two main types of reversing cameras, wired and wireless.
Wired cameras are permanently installed on the truck, while wireless cameras can be moved from one vehicle to another.
Both types of cameras have their own benefits and drawbacks. Wired cameras are more reliable, as there is no risk of the signal being interrupted. However, they are also more expensive to install.
Wireless cameras, on the other hand, are less expensive and more flexible, but their signals can be interrupted by interference from other electronic devices.
When choosing a reversing camera, it is important to consider the specific needs of the truck and driver.
Wired reversing camera systems
A wired commercial vehicle reversing camera system is a type of system that is normally used on trucks. This type of system uses a camera that is mounted on the back of the truck and wired to a monitor that is located in the cab of the truck.
The camera will allow the driver to see what is behind the truck and will help to avoid accidents when backing up.
The wired system is typically used on trucks that are rigid vehicles or articulated trucks that use the same trailer most of the time.
This type of system is very beneficial for drivers who need to be able to see what is behind them when they are backing up.
This example shows the fundamental parts of a wired reversing camera system.
The camera mounts onto the rear of the vehicle in a position that will provide the best overall view of the rear of the truck.
The monitor is mounted within the cab for the driver to see the footage in the cab when maneuvering.
The camera and monitor are connected via a cable that can be fixed along the length of the vehicle using secure clips.
Finally, the system is powered by plugging it into a 24v or 12v socket within the cab which powers the monitor and camera through the wiring.
Wireless reversing camera systems
Wireless commercial vehicle reversing camera systems are becoming increasingly popular, as they offer a number of benefits over traditional wired systems.
Wireless systems are much easier to install, as there is no need to run wires through the vehicle. This makes them ideal for trucks that use different trailers often, or for extra long vehicles where wiring could be an issue.
Wireless systems also tend to be more reliable, as there are no wires that can become damaged or disconnected.
And finally, wireless systems offer greater flexibility in terms of positioning the camera, as there is no need to worry about routing wires to the camera location.
For all these reasons, wireless commercial vehicle reversing camera systems are the preferred choice for many truck and HGV operators.
This example shows the fundamental parts of a wireless reversing camera system.
The camera mounts onto the rear of the vehicle in a position that will provide the best overall view of the rear of the truck.
The monitor is mounted within the cab for the driver to see the footage in the cab when maneuvering.
The camera and monitor are connected wirelessly through a 2.4GHz digital wireless signal, as you can see a small aerial on each device.
Finally, the system is powered by plugging the monitor into a power source within the cab, and the camera will require a power source from the rear of the vehicle such as reversing light power wire.
Can more than one reversing camera be used on a truck?
Yes, you can use multiple reversing cameras on an HGV truck. There are multiple channel reversing camera options for mounting cameras on the rear of a truck and also mounting them on the sides of an HGV vehicle, or behind the truck cab for coupling up a trailer.
The number of channels will depend on how many cameras you want to use. For example, a four-channel system will allow you to use up to four cameras.
There are also systems that come with a monitor that gives you a split-screen view of all the camera feeds. This can be useful if you want to have a clear view of what is behind your truck as well as what is beside it.
When choosing a reversing camera system for an HGV truck, make sure to choose one that is designed for commercial vehicles. These systems are typically made with heavier-duty materials and have more features than those designed for passenger vehicles.
4 camera wired commercial vehicle reversing camera system for connecting four cameras to a vehicle using wires to view each camera via the monitor in the truck cab.
4 camera wireless commercial vehicle reversing camera system for connecting four cameras to a vehicle wirelessly to view each camera via the monitor in the truck cab.
Why commercial vehicle reversing cameras provide safety and benefits for HGV drivers
Many collections or deliveries that truck drivers make don’t always have the benefit of a banksman to watch and guide them into tight spaces or make difficult maneuvers with their vehicles.
Reversing a commercial vehicle, such as an HGV truck, can be a difficult and dangerous maneuver. If done incorrectly, it can result in damage to property or even injuries to people.
That’s why all heavy goods vehicles should be equipped with a reversing camera system, to prevent accidents, and help the driver navigate a vehicle safely from the truck cab.
A reversing camera is a camera that helps the driver see behind the vehicle while reversing. It gives the driver a clear view of what is behind the truck so that they can reverse safely.
Reversing cameras are especially helpful for trucks because of their large size. They make it easier for the driver to see what is behind them and avoid any potential hazards.
There are many different types of reversing cameras available on the market. Some systems even come with multiple cameras that give the driver a 360-degree view of their surroundings. No matter what type of system you choose, a reversing camera will help you reverse your truck safely and avoid any accidents.